KVH Industries KVHTRACVISION G4 Technical Manual page 24

Part
Tie-wrap screw mount
Terminal strip connectors
Sensor module to ADCU power wire ferrite
#4-24 thread-forming screws
Choosing Component Locations
The major considerations in locating the TracVision components
are described below.
Cable Lengths
When determining component locations, keep in mind
accessibility and cable lengths between units. Lengths of these
cables are as follows:
Cable (Function)
Data Cable (ADCU to Antenna Unit)
PC Cable (ADCU to PC)
RF Cable (Antenna to IRD)*
Power Cable (Power to Antenna Unit)
Sensor to ADCU Cable (GyroTrac)
IRD Ground to ADCU Ground Cable
† North American system
††
European system
* Not included with European systems
54-0147
Qty.
6
5
1
4
Length
50 ft (15 m) †
100 ft (30 m) ††
6 ft (2 m)
50 ft (15 m) †
50 ft (15 m)
30 ft (10 m)
50 ft (15 m)
Table 2-4
GyroTrac Kitpack Contents
(Continued)
Table 2-5
Lengths of Provided
Belowdecks Cables
Installation
11