KVH Industries KVHTRACVISION G4 Technical Manual page 3

GyroTrac Advanced Digital Control Unit (ADCU) Menu Quick Reference Guide
™
ADCU Primary Display Options
See Section 3.2 for details
SELECTED DISPLAY
Select Installed
Select Installed
Satellite A
Satellite B
Enter GyroTrac Mode Menus
GyroTrac Mode Menus
See Section 3.3 for details See Section 3.4 for details
Setup display type? Setup data outputs?
Enter Next Return Yes
compass?
Yes Next Return
Magnetic Heading
###.#°
Mag/HDG True/HDG
###.#° ###.#°
Pitch, Roll & Yaw?
Yes Next Return
Pitch Roll Yaw
#.#° #.#° #.#°
Rate of Turn?
Yes Next Return
Mag/Hdg Rate/Sec
#.#° #.#°
Latitude Longitude?
Yes Next Return
Alert Screens
Lat: ##
Certain operations temporarily halt data
Long: ##
output. In this event, the ADCU will display a
set of alert screens. Select "Yes" to proceed,
"No" to return to the Main Data Display.
Antenna display?
Yes Next Return
Tracking <Sat Name>
###.#° ##.#° ####
ANTENNA Initializing
No Antenna Information
See "Alert Screens" on page 65
for more details.
Compass Displays* Pitch, Roll, Yaw
Magnetic Heading Pitch Roll
###.#° #.#° #.#°
Mag/HDG True/HDG
###.#° ###.#°
* True North Display requires GPS data
See Section 3.5 for details
Setup configuration?
Next Return Yes Next
Set sine-cos levels? Set brightness?
Yes Next Return Yes Next
Select Mag/True
Dim or Brighten
ADCU Display
Set Reference Voltage
Set Swing Voltage
Set serial outputs? Set Heading int/ext?
Yes Next
Yes Next Return
Select Internal or External
Select Serial Port 1, 2, or 3
Heading Reference Source
Set Speed
Select Output Type
Set NMEA Outputs
Set Furuno outputs? Set Gyro Offsets?
Yes Next
Yes Next Return
Select Mag/True Set Offset Pitch
Set Data Rate Set Offset Roll
Set Offset Yaw
Default Display box?
Yes Next
Display Default
Set TV com on/off?
** WARNING **
Data will be HALTED Yes Next
TV Antenna Communication
On or Off
* ARE YOU SURE? *
Yes No
Rate of Turn
Yaw Mag/Hdg Rate/Sec
#.#° #.#° #.#°
Return to Selected Primary Display
See Section 3.6 for details
Control Compass?
Return Enter Next Return
Set AutoCal On/Off?
Return Yes Next Return
Autocalibration On or Off
Read Cal score?
Return
Yes Next Return
Calibration Accuracy, Magnetic
Environment, and Calibration #
Clear Compass Cal?
Return Yes Next Return
Compass Calibration Reset
The Control Compass Menus are only
available if the selected heading
reference source is INTERNAL.
Return
Return
†
Latitude/Longitude Antenna Displays
Lat: ##
Tracking <Sat Name>
Long: ## ###.#° ##.#°
†
Lat/Long Display requires GPS data
See Section 3.7 for details See Section 3.8 for details
Get Antenna status? control antenna?
Enter Next Return Enter
Get System Errors?
Yes Next Return
Errors Detected
Get version?
Yes Next Return
Antenna Type and Version
Get serial number?
Yes Next Return
Antenna Serial Number
Get Thres/sig level?
Yes Next Return
Threshold and
Signal Levels
Get skew angle?
Yes Next Return
LNB Skew Angle
Get bit error rate?
Yes Next Return
Bit Error Rate
####
ANTENNA Initializing
No Antenna Information
Next Return
Man control antenna?
Yes Next Return
Adjust Azimuth
Adjust Elevation
Restart antenna?
Yes Next Return
Antenna Restarts
Set sleep on/off?
Yes Next Return
Sleep Mode On/Off
set instant on/off?
Yes Next Return
Instant On Mode On/Off
Install satellite?
Yes Next Return
Install Sat Pair
Set Latitude
Set Longitude
Restart Antenna
Set Lat/Long?
Yes Next Return
Set Latitude
Set Longitude
Select Satellite?
Yes Next Return
Select Active Satellite
Sat frequency scan?
Yes Next Return
Update Frequency