Advertisement
R
C
ECEIVING A
ALL
When you receive a call, the phone rings
NEW
and
flashes.
and the caller's
NEW
number appear on the display. To answer
NEW
the call, pick up the handset.
until you have reviewed all calls.
T
IMER
This unit is designed with a clock timer to
count up to 60 minutes in the off-hook time
00:00
(in
format). The timer appears on the
display and starts to count up when you dial
a number or answer incoming calls.
If you lift the handset and don't dial a
number, the timer appears and starts to
count up after 10 seconds.
U
P
SING
AUSE
When you manually dial a number, you can
have your telephone pause anywhere during
the dialing sequence. Simply press
at the desired location, and
REDIAL/PAUSE
appears on the display next to the dialed
number. Ô
CALLER ID
OPERATION
If you subscribe to a Caller ID service, the
phone automatically displays information
about calls you receive and stores the
information in memory. The system can
store up to 64 incoming phone numbers and
incoming names into call records. Ô
R
C
R
EVIEWING
ALL
ECORDS
d
e
1. Repeatedly press
or
to review the
END OF NEW CALL
new calls.
appears
when all calls have been reviewed.
2. To review all the records from oldest to
REVIEW e
newest, repeatedly press
To review the records from newest to
d REVIEW
oldest, repeatedly press
After reviewing all records in memory,
END OF LIST
appears.
3. If an incorrect, invalid or incomplete
LINE ERROR
Caller ID signal is received,
appears on the display.
If the name and number are not
available due to the caller's restriction,
PRIVATE CALL
appears on the display.
If the name and number are not
–UNAVAILABLE-
available,
appears on the
display.
RPT
appears beside a number if you
have received a call from the same
phone number more than once.
4. If you do not press a button within about
15 seconds, the system automatically
returns to the normal display. Ô
C
B
ALL
ACK FROM
C
ID M
ALLER
1. With the handset on the base, press
e
or
to find the number to redial.
flashes
2. Press
CALL BACK
appears.
3. Lift the handset, and the number is
automatically redialed.
Select one of the four options below based
on your telephone company's requirements
to make toll calls within your area code.
Option1
1 + Area Code + 7-digit number (11 digits)
Option 2
1 + 7-digit number (8 digits)
Option 3
Area Code + 7-digit number (10 digits)
P
Option 4
7-digit number
1. With the handset on the base, press
e
or
to find the number to redial.
2. Press
CALL BACK
number flashes.
d
e
3. Press
or
to select one of the above
four options.
4. Press
CALL BACK
5. Pick up the handset, and the selected
number is dialed automatically.
D
C
ELETING
ALL
You can delete an individual call record, or
all call records stored in the system. Ô
.
To delete a single call record, press
until the call record you want to delete
.
appears, then press
record is deleted, and the remaining call
records are automatically renumbered.
To delete all of the call records after
reviewing all new calls, hold down
for about three seconds.
appears. Press
DELETE
NO CALLS
all call records,
TOTAL:00 NEW:00
appears.
FCC STATEMENT
This phone is hearing aid compatible.
Your telephone complies with Part 68 of FCC Rules and
the requirements adopted by the ACTA. On the back of
this product is a label with this product's FCC Product
Identification number in the format DYFMT08B433904. If
requested, you must provide this information to the
telephone company.
Note: You must not connect your telephone to:
• coin-operated systems
• most electronic key telephone systems
• party-line systems
EMORY
d
PICK UP CALL
twice.
• If you do not have any special phone
• If you do not have any special phone
services, pressing FLASH might disconnect
services, pressing FLASH might disconnect
the current call.
the current call.
Using Pause
Using Pause
• Redial memory holds up to 32 digits, so you
• Redial memory holds up to 32 digits, so you
can redial long distance, as well as local
can redial long distance, as well as local
phone numbers.
phone numbers.
• When you redial a number, the telephone
• When you redial a number, the telephone
pauses for about four seconds at the pause
pauses for about four seconds at the pause
entry. For long pauses, press
entry. For long pauses, press
REDIAL/PAUSE again.
REDIAL/PAUSE again.
Caller ID Operation
Caller ID Operation
• During an incoming call, the phone company
• During an incoming call, the phone company
automatically sends the correct time
automatically sends the correct time
d
between the first and second rings to update
between the first and second rings to update
your system's display.
your system's display.
• After reviewing all calls, the system resets so
• After reviewing all calls, the system resets so
. The 7- or 11-digit
that the display shows
that the display shows
Call Back from Caller ID Memory
Call Back from Caller ID Memory
• When the caller's phone number has a
• When the caller's phone number has a
different area code from the preset area
different area code from the preset area
code, 1 and the caller's three digit area code
code, 1 and the caller's three digit area code
are inserted automatically during memory
are inserted automatically during memory
again to confirm. Ô
call back.
call back.
• When the caller's phone number has the
• When the caller's phone number has the
same area code as the preset one, 1 and the
same area code as the preset one, 1 and the
three digit area code are deleted
three digit area code are deleted
automatically during the memory call back.
automatically during the memory call back.
R
Deleting Call Records
Deleting Call Records
ECORDS
• When the phone's memory is full, it
• When the phone's memory is full, it
automatically replaces the oldest call record
automatically replaces the oldest call record
with the newest incoming call.
with the newest incoming call.
• If you do not press any button within about
• If you do not press any button within about
d
e
or
15 seconds while the display shows
15 seconds while the display shows
ALL CALLS
ALL CALLS
to normal display and the call records are not
to normal display and the call records are not
twice. The
DELETE
deleted.
deleted.
DELETE
ERASE ALL CALLS
. The system deletes
appear, then
Ô
Ô
Ô
Ô
NOTE
NOTE
0
0
new calls.
new calls.
ERASE
ERASE
, the phone automatically returns
, the phone automatically returns
3
Advertisement
