Radio Shack 43-3904 User Manual

43-3904 Setup
User's Guide
Package contents
Caller ID Trim Phone
Features

Install batteries

1
1.
2.
3.
n Battery Notes:
Thank you for purchasing your Caller ID Trim Phone from
RadioShack. Please read this user's guide before installing,
display dims, replace the batteries.
setting up, and using your new phone.
You must install the batteries before connecting the
telephone to the wall jack. If no batteries are installed,
the telephone and Caller ID still work but without display.
ID and telephone menory information may be lost.
Dispose of batteries promptly and properly. Do not burn
or bury them.
Use only fresh batteries of the required size and type.
of batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
If you do not plan to use the phone with battery for
a long time, remove the battery. Batteries can leak
chemicals that can damage electronic parts.
Make connections
2
n Notes:
Your telephone connects directly to a modular telephone
line jack. If your telephone wiring does not have a
modular jack, you can update the wiring yourself using
jacks and adapters (available at your local RadioShack
store), or have the telephone company update the
wiring for you. You must use compatible modular jacks
requirements adopted by the ACTA. The telephone
cord and modular plug provided is Part 68 compliant for
connecting to the telephone company network.
connected to the telephone line, be sure that installing
the telephone does not disable your alarm equipment.
If you have questions about what will disable your alarm
2 3
equipment, contact your telephone company or a
qualified installer.
Place or mount your phone
3
RINGER ON/OFF
On a flat surface
ON OFF
1.
2.
On a wall plate (not included)
1.
CALL BACK
2.
DELETE
On a wall
1.
2.
3 /
16
3.
4
VOLUME NORM/HI
NEW
TONE/PULSE
REVIEW
Keypad (0~9)
REDIAL/PAUSE
FLASH
FLASH
MUTE
5 6
n
Note: The USOC number of the jack to be installed is
Set dialing mode
4
TONE/PULSE
TONE/PULSE TONE
1.
2.
TONE/PULSE TONE
TONE/PULSE PULSE
Change settings
5
1.
ENTER LANGUAGE ENTER LANGUAGE
ENG ESP
2.
FRA LCD
DELETE
CONTRAST
3.
ENTER AREA CODE
DELETE
DELETE
4.
ENTER TIME DATE
5. DELETE AM PM
7