Canon imagePROGRAF iPF770 User Manual page 94

Printing on Non-Standard Paper Sizes (Windows)
4
Make sure the Main sheet is displayed.
5
A
In the Media Type list, select the type of paper that is loaded.
6
After confirming that
7
Click the Page Setup tab to display the Page Setup
sheet.
8
O
Click Size Options to display the Paper Size Options dialog box.
9
Enter a desired paper name in Custom Paper Size Name. 430 mm Square is used in this example.
10
Select mm in Units.
11
Enter 430 (16.9 in) in both Width and Height.
Note
12
Click Add to register 430 mm Square.
13
Click OK to close the Paper Size Options dialog box.
14
94
Click Manual in the
15
A
In the Page Size list, click the size you added,430 mm Square.
D
Easy Settings is selected, select from the
•
If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either Width
or Height, the other value will be automatically applied based on the original aspect ratio.
L
Paper Source list.
E
Print Target list.
iPF770
User's Guide