Setting The Unit Cost For Paper - Canon imagePROGRAF iPF770 User Manual

Setting the Unit Cost for Paper

Setting the Unit Cost for Paper
Setting the Unit Cost for Paper
Opens the Paper sheet. This sheet is used to configure the unit cost of paper.
Setting Standard Prices
1
Select the media type in Media Type.
2
Enter the Width and Length of the paper, as well as the Price for the area of the configured width x height.
3
Click the Add button. To change the unit cost of a media type that has already been configured, click the
Overwrite button.
4
Click the OK button.
•
The settings are not applied until you click the OK button.
Important
Specifying Price by Roll Paper
1
Select the media type in Media Type.
2
Click the Roll Paper Width Settings button to display the
Roll Paper Width Settings dialog box.
472
iPF770
User's Guide