Canon imagePROGRAF iPF770 User Manual page 422

Menu Settings
GL2 Line &
Settings Pen
Manag-
er
Proces-
singOp-
tion
GL2 Set Print
Inter- EOP Timer
face
Setup
TCP/IP
422
Setting Item
Smoothing
ThickenFineLines
AdjustFaintLines
Warning
PageSizeProcess1
PageSizeProcess2
IPv4 IPv4 Mode
Proto- DHCP
col
BOOTP
RARP
IPv4 IP Address
Settings
Subnet Mask
Default G/W
DNS DNS Dync update
Settings
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS
Settings Dync
update
Pri. DNS SrvAddr
Description, Instructions
•
If you choose Smooth
Select On to print fine lines more distinctly.
If fine lines are printed in colors that do not match the col-
ors of other shapes, selecting Off may help produce the
expected results. However, lines in some colors may ap-
pear broken.
Select On to have any GL2-related warnings displayed.
Set the position of the margin relative to the image range.
Choose Off to set the margin outside the image range.
Although the image will not be missing, you should print
on paper larger than the size of the image range plus the
margins.
Choose On to set the margin inside the image range.
The image may be missing depending on the layout.
Change the method of handling image range information.
Normally, leave the setting Off.
Try On if the image is missing or you get a blank paper.
Print GL2 settings information.
Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
Choose whether the printer IP address is configured auto-
matically or a static IP address is entered manually.
Specify the protocol used to configure the IP address au-
tomatically.
Specify the printer network information when using a stat-
ic IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
The value that was automatically configured is displayed if
you have set IPv4 Mode to Automatic.
Specify whether DNS server registration is updated auto-
matically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Statefull Specify whether DNS server registration is updated auto-
Addr matically.
State-
less
Addr
Specify the DNS server address.
iPF770
User's Guide