Configuring Special Settings - Canon imagePROGRAF iPF770 User Manual

iPF770
2
Click the Binding Settings button.
•
You cannot click the Binding Settings button in the following situations.
•
Important
When the Image Size is set to a value smaller than 100%
•
When a graph is selected
•
When page breaks have been set
•
When a sheet or cell is protected
Open the Binding Settings dialog box.
3
If the Binding checkbox is not checked, select it to turn binding on.
4
Select Binding Edge.
5
Select Binding Margin.
6
Click the OK button.
Return to the Layout screen.
Check that the Binding settings are applied in the
preview screen.
7
Configure the settings in the Printing Wizard dialog box.

Configuring Special Settings

Configuring Special Settings

You can configure Special Settings from the imagePROGRAF Print Plug-In toolbar.
1
Click imagePROGRAF in the toolbar, and select
Special Settings.
2
Turn the checkbox for the item you want to change on or off.
Show progress indicator during plug-in start-
up
User's Guide
Item
When this setting is off, hides the progress indicator that appears while the
plug-in is starting up.
Configuring Special Settings
Details
245