Yamaha F225A Service Manual page 156

POWR
CAUTION:
Before installing the oil pump, be sure to
fill it with engine oil through the oil pas-
sage k.
16. Install the baffle plate G to the specified
torque.
Baffle plate nut:
12 N·m (1.2 kgf·m, 8.7 ft·lb)
17. Install the new gasket and crankcase
cover, and then tighten the bolts to the
specified torque in two stages and in the
sequence shown.
5-59
Power unit
Crankcase cover bolt:
1st: 14 N·m (1.4 kgf·m, 10 ft·lb)
2nd: 28 N·m (2.8 kgf·m, 20 ft·lb)
18. Install the new gasket and cooling water
passage cover, and then tighten the bolts
to the specified torque in the sequence
shown.
Cooling water passage cover bolt:
12 N·m (1.2 kgf·m, 8.7 ft·lb)
19. Before installing the power unit, be sure
to fill it with engine oil through the oil pas-
sage l of the oil filter bracket.
NOTE:
Apply a thin coat of engine oil to the O-ring of
the new oil filter before installation.
69J3D11