Chapter 1
Overview
Table 1-1
Features (continued)
Manageability
Cisco Intelligence Engine 2100 (IE2100) Series Cisco Networking Services (CNS) embedded agents for automating
•
switch management, configuration storage and delivery
Dynamic Host Configuration Protocol (DHCP)-based autoconfiguration for automatically configuring the switch during
•
startup with IP address information and a configuration file that it receives during DHCP-based autoconfiguration
DHCP replaces the Bootstrap Protocol (BOOTP) feature autoconfiguration to ensure retrieval of configuration files
Note
by unicast TFTP messages. BOOTP is available in earlier software releases for this switch.
Address Resolution Protocol (ARP) for identifying a switch through its IP address and its corresponding MAC address
•
Cisco Discovery Protocol (CDP) versions 1 and 2 for network topology discovery and mapping between the switch and
•
other Cisco devices on the network
Network Time Protocol (NTP) for providing a consistent timestamp to all switches from an external source
•
Directed unicast requests to a Trivial File Transfer Protocol (TFTP) server for obtaining software upgrades from a TFTP
•
server
Default configuration storage in Flash memory to ensure that the switch can be connected to a network and can forward
•
traffic with minimal user intervention
In-band management access through a CMS web-based session
•
In-band management access through up to 16 simultaneous Telnet connections for multiple CLI-based sessions over the
•
network
•
In-band management access through up to 5 simultaneous, encrypted Secure Shell (SSH) connections for multiple
CLI-based sessions over the network
•
In-band management access through Simple Network Management Protocol (SNMP) set and get requests
•
Out-of-band management access through the switch console port to a directly-attached terminal or to a remote terminal
through a serial connection and a modem
Note
For additional descriptions of the management interfaces, see the
78-11380-04
1
1
Catalyst 2950 Desktop Switch Software Configuration Guide
"Management Options" section on page
Features
1-6.
1-3