Displaying The Spanning-Tree Status - Cisco Catalyst 2950 Software Configuration Manual

Chapter 12 Configuring Optional Spanning-Tree Features

Displaying the Spanning-Tree Status

To display the spanning-tree status, use one or more of the privileged EXEC commands in
Table 12-2 Commands for Displaying the Spanning-Tree Status
Command
show spanning-tree active
show spanning-tree detail
show spanning-tree interface interface-id
show spanning-tree mst interface interface-id
show spanning-tree summary [totals]
For information about other keywords for the show spanning-tree privileged EXEC command, refer to
the Catalyst 2950 Desktop Switch Command Reference for this release.
78-11380-04
Purpose
Displays spanning-tree information on active interfaces only.
Displays a detailed summary of interface information.
Displays spanning-tree information for the specified interface.
Displays MST information for the specified interface.
Displays a summary of port states or displays the total lines of the
spanning-tree state section.
Catalyst 2950 Desktop Switch Software Configuration Guide
Displaying the Spanning-Tree Status
Table
12-21
12-2: