Encore EN-4000 Configuring General Settings page 9

Configuring General Settings for the EN-4000
4.3.2 Configuring the Management System Language
To set the language used for the EN-4000 management system, do the
1
following:
a Select the System management area tab.
b Then select the System configuration area tab.
c Then select the Language and Style detail tab.
❖ The Screen to Set the Management System Language is displayed
(Figure 4-13).
Figure 4-13. Screen to Set the Management System Language
On the Screen to Set the Management System Language, select the
2
Language pulldown menu and select your preferred language.
Note: Currently, the management system interface is available only in
English.
To set time-of-day synchronization, see
of Day.
4.3.3 Configuring the Device Name and Time of Day
To configure the EN-4000's identity within the network, and to configure time
1
zone and time-of-day synchronization source for the EN-4000, do the
following:
a Select the System management area tab.
b Then select the System configuration area tab.
c If necessary, select the General Settings detail tab.
❖ The System Screen for General Settings is displayed
Synchronizing the EN-4000's Time
(Figure
Go to Table
Page 4-9 of Contents
4-14).