Table of Contents
Advertisement
Page 4-10
On the System Screen for General Settings, you can set a unique name for
this EN-4000. You can also set its local time, and you can set a hierarchy of
network time protocol (NTP) servers for synchronizing the EN-4000's time of
day.
In the Hostname field, type a name for the EN-4000, to identify it in the
2
network. Then click the Save & Apply button (in the lower right corner of
the screen).
Note: The name must be unique within the network. Get all names and IP
addresses from your network administrator.
❖ The EN-4000 saves its new name and uses the new name immediately.
Caution: If you type a non-permitted character, the entire name displays
!
in red. If you try to save a name with non-permitted characters, a
message similar to the message in
In that case, click the OK button to close the message. Examine the name
and remove special characters until the name display returns to black. Then
save the name again.
Figure 4-14. System Screen for General Settings
Figure 4-15. Message about Invalid Entry
EN-4000™ Reference Manual, Document 4
Figure 4-15
is displayed.
Go to Table
of Contents
Advertisement
Table of Contents
