Table of Contents
Advertisement
Configuring General Settings for the EN-4000
Some quick guidelines for device names follow:
• Spaces are not permitted in a device name.
• The name cannot end with a hyphen (-), a period (.), or an underscore (_).
• Most other special characters are not permitted anywhere in the name.
To use the browser's date and time settings, click the button to Sync with
3
browser.
❖ The EN-4000 management system adopts the browser's time-of-day
settings.
Select the arrow on the right of the Timezone field to pull down a list of
4
major cities in each time zone. In the pulldown menu, select the time zone
the EN-4000 will use (usually the closest city in your time zone). Then select
the Save & Apply button.
❖ The EN-4000's management system displays the selected city's time.
Note: To get the time of day for the EN-4000 at regular intervals, see
Synchronizing the EN-4000's Time of
4.3.4 Configuring System Logging
To set logging of system activities for the EN-4000, do the following:
1
a Select the System management area tab.
b Select the System configuration area tab.
c Then select the Logging detail tab.
❖ The Screen to Set System Logging is displayed
On the Screen to Set System Logging, enter information into the following
2
fields:
Day.
Figure 4-16. Screen to Set System Logging
Page 4-11
(Figure
4-16).
Go to Table
of Contents
Advertisement
Table of Contents
