Table of Contents
Advertisement
Page 4-26
4.4.5 Configuring Traffic Priority
Use the fields in
Figure 4-35
network traffic. Consult your network administrator for the settings to use.
Figure 4-35. Quality of Service Configuration Screen
After configuring the fields on the screen, do one of the following:
a If you wish to save the configuration and use it immediately, select Save and
Apply.
b If you wish to save the configuration, but not to use it until the EN-4000 is
restarted, select Save.
c If you wish to discard the configuration, select Reset.
EN-4000™ Reference Manual, Document 4
to configure Quality of Service (QoS) settings for
Go to Table
of Contents
Advertisement
Table of Contents
