Table of Contents
Advertisement
Configuring General Settings for the EN-4000
Note: The value for Current System Time, displayed on this screen, is
configured in
Configuring the Device Name and Time of
In the Update Interval field, enter the number of seconds between time-
3
of-day synchronization requests.
Enter the value for the Count of Time Measurements.
4
Enter the value for the Offset Frequency
5
Under the heading Time Servers, do the following:
6
a For each NTP server that the EN-4000 might follow to synchronize time of
day, do the following:
i Under Hostname, type a name for an NTP server.
Note: This entry can be an IP address or a website URL.
ii Under Port, type the port number the EN-4000 will use to reach the NTP
server.
b If you need to add an NTP server, click on the Add button.
❖ A row is displayed for another NTP server.
c If you wish to delete an NTP server entry, click on the Delete button for that
row.
❖ The NTP server entry is deleted.
Figure 4-17. Time Synchronization Screen
Page 4-13
Day.
Go to Table
of Contents
Advertisement
Table of Contents
