Adjusting The Sound - BenQ W700 User Manual

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speakers. Be sure
you have made a correct connection to the projector audio input. See
20 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound,
• Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display
To restore the sound, press MUTE again.
• Using the OSD menu
1. Press MENU/EXIT and then press
SETUP: Advanced menu is highlighted.
2. Press
The Audio Settings page displays.
3. Highlight Mute and press
4. To restore the sound, repeat steps 1-3 and press
Adjusting the sound level
To adjust the sound level,
• Using the remote control
Press
• Using the OSD menu
1. Repeat steps 1-2 above.
2. Press
desired sound level.
Turning off the Power on/off ring tone
1. Repeat steps 1-2 above.
2. Press
to select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power on/off ring tone.
44 Operation
Downloaded From projector-manual.com BenQ Manuals
INPUT SOURCE
Computer
PC
HDMI 1/2
Component
VIDEO
S-VIDEO
in the upper right corner of the screen.
to highlight Audio Settings and press ENTER. 
or to select a desired sound level.
to highlight Volume and press
to highlight Power on/off ring tone and press
AUDIO IN
mini jack
HDMI
RCA
RCA
RCA
/ until the SYSTEM
/ to select On.
/
/ to select a
"Connection" on page
AUDIO OUT
mini jack
mini jack
mini jack
mini jack
mini jack
to select Off.
/