BenQ W700 User Manual page 59

Resetting the lamp timer
11. After the startup logo, open the On-Screen
Display (OSD) menu. Go to the SYSTEM
SETUP: Advanced > Lamp Settings
menu. Press MODE/ENTER. The Lamp
Settings page displays. Press
highlight Reset lamp timer and press
MODE/ENTER. A warning message
displays asking if you want to reset the lamp timer. Highlight Reset and press MODE/
ENTER. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
Downloaded From projector-manual.com BenQ Manuals
Notice
to
Reset Lamp Timer?
Cancel
Reset
Maintenance 59