Remote Control - BenQ W700 User Manual

Remote control

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1. IR transmitter
Transmits signal to projector.
2. LED indicator
Lights only when the key is pressed
3. POWER ON
Turns on the projector. See
the projector" on page 26
4. VIDEO
Displays the VIDEO source selection. See
"Switching input signal" on page 31
5. COMP
Displays the COMPONENT source
selection. See
page 31
6. HDMI 1
Displays the HDMI 1 source selection. See
"Switching input signal" on page 31
details.
Downloaded From projector-manual.com BenQ Manuals
"Starting up
for details.
"Switching input signal" on
for details.
7. Up cursor/Keystone (
: Navigates and changes settings in the
17
OSD. See
27
18
: Manually corrects distorted images
resulting from an angled projection.
19
20
See
for details.
21
8. Left cursor/Decrease volume level (
)
22
23
: Navigates and changes settings in the
24
OSD. See
25
27
: Decreases volume.
26
9. MODE/ ENTER
27
MODE: Choose a suitable preset mode
28
29
ENTER: Enter key for OSD menu.
30
10. MENU/ EXIT
MENU: Turns on the On-Screen Display
EXIT: Goes back to previous OSD menu,
See "Using the menus" on page 27
details.
11. MUTE
Mutes the built-in speaker.
12. USER 1/ User 2/ User 3
Select the User memory settings.
13. BRIGHT
Displays the BRIGHTNESS setting bar. See
for details.
"Adjusting Brightness" on page 38
14. COLOR
Displays the COLOR setting bar. See
"Selecting a Color Temperature" on page
39 for details.
15. INFO
Starts the INFORMATION function.
for
/ )
"Using the menus" on page
for details.
"Correcting keystone" on page 33
"Using the menus" on page
for details.
for usage environment.
(OSD) menu.
exits and saves menu settings.
Note: User 3 not supported for this
model.
for details.
Introduction
/
for
11