Tip) Pressing ON button will change it to OFF
eliminating the back light. Pressing the same button
again will restore the back light.
4. Exit from the Set Up mode by pressing the ~~~~
button.
Tip) To turn ofS the back light manually, press the light
button while the back light is on.
1. Go to thie programming mode by pressing the ~~I~
and ALTAR button simultaneously for three seconds.
2. Press the ~L~~~ button in programming mode.
3. Press either the S
D or R~~V button depending
upon the role of the remote
. If the MX-5OOTM is
to be copied from, press the
button. If it is to be
copied into, press the RECV button.
4. If you wish to clone the entire device, press the ALL
button. If you wish to clone only one device at a time,
press the ~~VI~~ button.