Home Theater Master MX-500 Operating Manual page 14

8. Exit from preprogramming mode by pressing
the button and then exit from SET UP mode
by pressing the button once again.
9. Confirm yo entered the right code
number that matches your component by pressing
other functional buttons. If any of the buttons fail to
operate, as they should, please repeat from Step 1.
10. Continue to program other components by
repeating from Step 1 above.
2. Auto Scan with Three Digit Number
You can also program your remote control by sending
out series of Power Off commands for different brands
stored in the library by using the following steps.
1. Manually turn on the component you plan to
operate.
Tip) If your component has a discrete Power ON and
OFF button, please do not yurn on the component
manually.
2. Go to program setting m
control by pressing both th
buttons simultaneously for three seconds.
3. Select the ~-~~~ button next to the LCD screen.