Home Theater Master MX-500 Operating Manual page 22

Lcd screen preprogrammed and learning remote control

Hide thumbs Also See for MX-500:

button in programming mode.

3. Press one of the five-macro buttons.

Off in the programming mode.

functional buttons you wish to store in the

macro button you selected.(You can store up to 20

commands).

5. Store the command

u programmed into the macro

button by pressing the

e:I Up button.

6. Repeat from Step 3 to program other macro buttons.

7. Once you complete the

ramming and wish to exit

from this mode, press the

button. Exit from SET

UP mode by pressing the

button once again.

B. Programming

Macro Functions to the Ten Device

Buttons:

programming mode by pressing the

buttons simultaneously for three se

button in programming mode.