Home Theater Master MX-500 Operating Manual page 16

10. Confirm that you entered the right code number
that matches your component by pressing other
functional buttons. If any of the buttons do not
operate as they should, please repeat from Step 1.
11. Continue to program other components by
repeating from Step 1 above.
B. Learning From Other Remote Controls
You can program the MX-500TM to operate a component
by teaching the commands from your original remote
control to device buttons on the main screen menu, 20
buttons on 2 pages of the LCD per device, 31 rubber
buttons and the joystick located in the middle of the
remote control. The MX-5OOTM learns these commands
by receiving infrared signals directly from your existing
remote controls. The MX-500TM receives these signals
through its learning eye, located at the top of the unit.
Apart from the PAGE, MAIN, FAV buttons and Ml - M3
buttons which cannot be taught, the MX-500TM has the
capability of learning up to 530 commands.
Tip) Commonly usedfunction buttons include the two
pages of sub-commands within each of the 10 devices,
channel up and down, volume up and down, menu,
guide, exit, info, O-9 and joystick.
Points to Remember
If the remote control fails to learn a function after the
first try:
l
Keep the remotes stable by placing them on a flat surface.