Home Theater Master MX-500 Operating Manual page 24

You can use the audio receiver volume control in a different
mode (E.g. Audio receiver Volume Up and Volume Down
and Mute in Satellite mode) using the volume punch
through feature. You can also have channel punch through
(Channel Up, Channel Down) as well as eight VCR or DVD
transport buttons, Play, Stop, Fast Forward, Rewind, Skip-,
Skip+, Pause and Record, to operate in another mode such
as in Satellite, Cable and Audio modes.
1. Enter the programming mode by pressing the MAIN
and ~~T~~ buttons simultaneously for three seconds.
2. Press the P~~~~ button in programming mode.
3. Press the VOI, button on the LCD for Volume Punch
Through, the PLAY for Transport Punch Through and
the CH for Channel Punch Through.
4. Select the device you wish to punch through to (1 st
device e.g. Satellite receiver).
5. Select the device you wish to punch through from
(2nd device e.g. Audio receiver).
6. Punch through is saved when the second device is
pressed.
7. Repeat from Step 3 to program Punch Through for
other devices.
8. Once you have completed the programming and wish
to exit from this mode, press the &INN button.