Features & Specifications; Installation Options; Features; Heating Specifications - Lopi Spirit Bay B-Vent Owner's Manual

Installation Options:

¥ Masonry Fireplace Insert
¥ Factory Built (Metal)
Fireplace Insert

Heating Specifications:

Approximate Heating Capacity (in square feet)*
AFUE (Annual Fuel Utilization Efficiency)
High Burn Input Rate (In BTU's)
Low Burn Input Rate (In BTU's)
Efficiency**
* Heating capacity will vary with the home's floor plan and insulation, natural gas or Propane BTU rating, and outside temperature.
** Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent of installed system.
To measure the net BTU's, multiply the BTU input by the efficiency percentage (80% for natural gas, 82% for LP).

Dimensions

27-3/4Ó* for 8Ó Panels
29-3/4Ó* for10Ó Panels
31-3/4Ó* for12Ó Panels
40-1/2Ó* for 8Ó Panels
44-1/2Ó* for10Ó Panels
48-1/2Ó* for12Ó Panels
* Includes trim and the required 3/8Ó gap between the surround panels and fireplace.

Fuel:

Emissions:

Electrical Specifications:

12-5/8"
18-7/8"
The heater is designed either for natural gas or for propane (but not
for both). Check the sticker on the top of the gas control valve.
This unit has passed the ANSI emission standards for vented room
heaters as tested by OMNI Environmental Services, Inc.
115 Volts, 1.3 Amps, 60 Hz (150 watts on high)
F
EATURES AND

Features:

¥ Works During Power Outages
(millivolt system)
¥ High Efficiency; Up to 80% for Natural Gas,
82% for LP (Steady State)
¥ Optional Thermostat or Remote Control
¥ Realistic "Wood Fire" Look
¥ Convenient Operating Controls
¥ Variable-Rate Heat Output
¥ Quiet Blower for Effective Heat Distribution
¥ Low Maintenance
Natural Gas
4Ó Vent is angled 45¡ back
17-5/8"
24-1/8"
17-5/8"
13-1/2"*
(up to 6Ó of additional space is
required for vent hook-up)
9-1/4"*
S
PECIFICATIONS
600 - 1600
68 %
LP (Propane)
40,000
23,000
80%
Weight: 200 Lbs.
Width of unit at
fireplace opening
P 5
AGE
38,000
20,000
82%