Toshiba Satellite C800 Maintenance Manual page 192

Replacement Procedures
Installing the System Board
The following describes the procedure for installing the system board.
1. Put LCD cable in the right place and put MB on the top.
2. Secure the system board with the following screws.
3. Connect the Fan Cable, Power cable, Wireless Cable, RTC Cable, to the connector on
the system board.
4. Connect the speaker cable, power FFC cable, LCD cable to the system board.
Installing RTC battery
The following describes the procedure for installing the RTC battery unit
1. Connect the RTC cable to the system board and then stick the RTC battery to the system
board in the right place marked with white circle.
Satellite C800 and Satellite L800 Maintenance Manual (960-Q08)
M2.56.5 screw x3
36