Replacement Procedures
4.4
Optical disk drive
NOTE: Do not apply excessive force to the top of an optical disk drive.
Do not touch the shaded portion of the figure below, when the drive is removed
or installed.
Removing an optical disk drive
The following describes the procedure for removing an optical disk drive (See Figure 4-4-
1and 4-4-2).
1. Remove the HDD Door.
2. Remove the following screws securing an optical disk drive.
3. Disconnect an optical disk drive toward the arrow direction.
4. Remove screws securing side bracket.
Satellite C800 and Satellite L800 Maintenance Manual (960-Q08)
M23.0B FLAT BIND screw
Figure 4-4-1 Remove an optical disk drive
M23.0B FLAT BIND screw
x1
x2
13