Toshiba Satellite C800 Maintenance Manual page 181

Replacement Procedures
The following describes the procedure for installing the display assembly.
1. Put top assembly on display assembly and turn the hinge bracket to make the top boss
insert into hinge bracket hole.
2. Put LCD cable in the right place and put MB on the top. ( Figure 4-8-4)
3. Secure the hinges with the following screws.
 M2.56.5 FLAT BIND screw
4. Secure the system board with the following screws.
 M2.53
5. Put the wireless LAN antenna cable on the right location from the guide.
6. Put the base on the top and secure the base with the following screws.
 M2.5. x 6.5B
 M2. x 3.0B
 M2.5. x 3.0B
Satellite C800 and Satellite L800 Maintenance Manual (960-Q08)
Figure 4-8-4 LCD cable routing
FLAT BIND screw
BIND screw
BIND screw
BIND screw
x4
x3
x11
x3
x1
25