Toshiba Satellite C800 Maintenance Manual page 188

Replacement Procedures
Installing the touch pad
The following describes the procedure for installing the touch pad.
1. Stick and install the touch pad on the top cover assembly.
2. Insert the bracket into top hook and make top boss insert into bracket hole.
NOTE: Do not reuse the touch pad so that it can not be used after peeling off from the
computer. Be sure to stick a new touch pad.
When sticking the touch pad, be careful not to get the bubbles under the touch
pad.
3. Secure the bracket and button board with the following screws.
 M2.03.0 Flat BIND screws
4. Stick the protect Mylar on the touch pad plate.
5. Connect the touch pad flat cable to the connector on the touch pad
Satellite C800 and Satellite L800 Maintenance Manual (960-Q08)
x5
32