Replacement Procedures
Installing a Wireless LAN card
The following describes the procedure for installing a Wireless LAN card.
1. Insert a wireless LAN card terminals slantwise into the connector on the computer
and press a wireless LAN card and lock the secure screws.
2. Connect the wireless LAN antenna cable to the terminals on a wireless LAN card.
3. Put the wireless LAN antenna cable on the right location from the guide.
4. Stick the tape of cables on the surface. If fail to stick, replace tape with new adhesive
tape. (See Figure 4-7-4).
Satellite C800 and Satellite L800 Maintenance Manual (960-Q08)
M2.5. x 3.0B
BIND screw
Figure 4-7-4 Cables layout on motherboard
x1
22