Sharp AR-5618 Service Manual page 42

Main Sub
Contents
code code
30 01 Paper sensor status display
42 01 Developing counter clear
43 01 Fusing temperature setting
(During normal copy)
02 Setting of item related to fusing
temperature
03 Fusing temperature set value in
preheating
The paper sensor status is displayed with the lamps on the operation panel.
* When each sensor detects paper, the corresponding lamp turns on.
LED
Developer replacement required indicator
Misfeed indicator(Copier)
Toner cartridge replacement required indicator
Bypass tray indicator
1st tray indicator
2nd tray indicator
3rd tray indicator
4th tray indicator
Misfeed indicator(1st tray)
Misfeed indicator(2nd tray)
Paper required indicator
The developer counter data in the EEPROM is cleared and 0 is displayed on the 7-seg display.
When the [Interrupt] key is pressed at that time, the machine goes into the sub code input standby
mode. When the [CA] key is pressed, the simulation mode is terminated.
When the simulation is terminated, the current set value is displayed. When the [%] key is pressed,
the setting is changed. When the [START] key is pressed, the set content is written into the EEPROM
and the machine goes into the sub code input standby mode.
SIM choice
(exposure mode)
A AE mode lamp Fusing temperature set value when ready standby.
C TEXT mode lamp Black and white plain paper fusing temperature set
value.
D PHOTO mode lamp Heavy paper fusing temperature set value.
E AE+TEXT mode lamp Main motor begins rotation fusing temperature set
value.
F AE+PHOTO mode Main motor rotation end time set value.
lamp
G TEXT+PHOTO mode WARM UP completion time.
lamp
When the simulation is terminated, the current set value is displayed. When the [%] key is pressed,
the setting is changed. When the [START] key is pressed, the set content is written into the EEPROM
and the machine goes into the sub code input standby mode.
SIM choice
(exposure mode)
H AE mode lamp ALARM STOP
At shift sub thermister temperature.
I TEXT mode lamp ALARM STOP
At release sub thermister temperature.
J PHOTO mode lamp Rotation time after JOB ends (COOL DOWN)
When the simulation is terminated, the current set value is displayed. When the [%] key is pressed,
the setting is changed. When the [START] key is pressed, the set content is written into the EEPROM
and the machine goes into the sub code input standby mode.
SIM choice
(exposure mode)
N AE mode lamp Fusing temperature set value when preheating.
Q TEXT mode lamp Fusing temperature set value when Warm-UP at 120°C or
below.
T PHOTO mode lamp Fusing temperature set value when Warm-UP at 120°C
or below.
AR-5618S SIMULATIONS 7-12
Details of operation
Sensor name
Paper exit sensor
Duplex sensor
Paper entry sensor
Bypass tray empty sensor
1st tray paper empty sensor
2nd tray paper empty sensor
3rd tray paper empty sensor
4th tray paper empty sensor
2nd tray paper feed sensor
3rd tray paper feed sensor
4th tray paper feed sensor
Contents
Contents
Contents
Default
170
18/20cpm
model:150
23cpm
model:165
180
100
0
23
Default
230
180
0
Default
110
160
150