Sharp AR-5618 Service Manual page 41

：'11/Jul/22
1
Main Sub
Contents
code code
26 43 Side void amount setting
51 Copy temporary stop function
setting
54 Life correction ON/OFF setting
69 Used to set the operating for toner
end
1
1
Used to set the side void amount on the both sides.
Enter a set value with the Numeric keys and press the [START] key, and the entered value will be
saved and the machine will go into the sub code input standby mode.
The setting range is 0 ~ 10. When the set value is increased by 1, the void amount is increased by
0.5mm. The default is 5 (= 2.5mm).
To select the setting mode, press the [AUTO/TEXT/PHOTO] key. The set value of the selected mode
is displayed on the copy quantity display. At that time, the set value is also saved.
LED
AUTO indicator
TEXT indicator
* When the setting value is increased by 1, time is increased by 0.5ms.
When any key is pressed, it is displayed on the display section. When the [START] key is pressed,
the set code data is acquired and stored to the setting variable of sort/group copy temporary stop
function and to the EEPROM. The machine goes into the sub code input standby mode.
Code number
0
1
When the [Interrupt] key is pressed at that time, the machine goes into the sub code input standby
mode without rewriting the data. When the [CA] key is pressed, the simulation mode is terminated
without rewriting the data.
* When this is set to "Stop," temporary stop is made for every 250 copies in one copy job.
Setting is made whether the image correction is made according to developer consumption degree
(life progress) or not.
When this simulation is executed, the current code number is displayed on the 7-seg display.
(1=ON [Correction is performed.], 0=OFF [Correction is not performed.])
Enter the code number and press [START] key, and the setting is settled and written into the
EEPROM and the machine goes into the sub code input standby mode.
Switching can be made with [AUTO/TEXT/PHOTO] key, and the set value of the selected mode is
displayed on the copy quantity display section.
The setting entered at that time is written into the EEPROM.
LED
All OFF Correction in the AUTO mode (Only for the machine for JAPAN)
AUTO indicator Correction in the AUTO mode (Only for the machine for EX JAPAN)
TEXT indicator Correction in the TEXT mode
PHOTO indicator Correction in the PHOTO mode (Error diffusion)
AUTO indicator & TEXT Correction in the AUTO mode with the toner save mode ON
indicator
AUTO indicator & PHOTO Correction in the AUTO mode with the toner save mode ON
indicator
TEXT indicator & PHOTO Correction in the TEXT mode with the toner save mode ON
indicator
AUTO & TEXT & PHOTO Correction in the PHOTO mode (Dither)
indicators
This simulasion used to set the operating conditions for toner end.
When this simulation is performed, the current code number is displayed.
Enter a code number and press [START] key to save the setting.
<<Operations at toner end >>
Code number
0
1
2
AR-5618S SIMULATIONS 7-11
Details of operation
Side void amount (Right)
Side void amount (Left)
Setting
Not stop
Stop
Setting mode
Setting contents
Operation setting 1
Operation setting 2
Operation setting 3
Setting mode
* Default
Default
1
1
1
1
1
1
1
1