Table of Contents
Advertisement
Button
Switch the map view between a 3D perspective view and a 2D heading-up view.
Adjust the basic zoom and tilt levels to your needs. Three levels are available.
When selected, the map zooms out to show an overview of the surrounding
area if the next route event (manoeuvre) is far. When you get close to the event,
the normal map view returns.
Switch between daytime and night colour modes or let the software switch
between the two modes automatically a few minutes before sunrise and a few
minutes after sunset.
Select the colour scheme used in daytime mode.
Select the colour scheme used in night mode.
Replace the default position marker to one of the 3D vehicle models. You can
select separate icons for different vehicle types selected for route planning.
Separate icons can be used for car, pedestrian and the other vehicles.
Show or suppress 3D landmarks, 3D artistic or block representations of
prominent or well-known objects.
Show or suppress 3D city models, 3D artistic or block representation of full city
building data containing actual building size and position on the map.
Show or suppress the 3D elevation of the surrounding terrain.
Turn on or off track log saving, that is, saving the sequence of the locations your
journeys go through.
Select which Places to show on the map while navigating. Too many Places
make the map crowded so it is a good idea too keep as few of them on the map
as possible. For this, you have the possibility to save different Place visibility
sets. You have the following possibilities:
88 NX404AU English
•
Tap the checkbox to show or hide the Place category.
•
Tap the name of the Place category to open the list of its subcategories.
•
Tap
a previously saved one. Here you can also revert to the default visibility
settings.
Description
to save the current Place visibility set or to load
Advertisement
Table of Contents
