Table of Contents
Advertisement
This feature allows you to receive a warning when approaching a Road Safety
Camera or other alert points like school zones or railroad crossings. You must
ensure on your own liability that using this feature is legal in the country where
you intend to use it.
You can set the alert for the different alert point categories individually. The
following alert types are available:
For some of the alert points, the enforced or expected speed limit is available.
For these points, the audio alert can be different if you are below or above the
given speed limit.
Maps may contain driver alert information. Tap this button to turn on or off these
warnings and to set the distance from the hazard to receive the warning at.
These can be set individually for the different warning types.
You can control the volume of the following sound types:
Button
Controls for each sound type:
Button
Volume slider
Adjusts the volume of the related sound.
Use the switch to mute the related sound. The slider becomes inactive. Tap
again to re-enable.
•
Audio warning: beeps can be played (natural voice) or the type of the
alert can be announced (TTS) while you are approaching one of these
points, and an extra alert can warn you if you exceed the given speed
limit while approaching.
•
Visual warning: the type of the alert point, its distance and the related
speed limit appear on the Map screen while you are approaching one of
these cameras.
•
Only when speeding: The audio alert is only played when you exceed the
given speed limit.
•
When approaching: The audio alert is always played when approaching
one of these alert points. In order to draw your attention, the alert is
different when you exceed the speed limit.
These controls affect the volume of the guidance sounds (verbal instructions).
Turn off the attention tone preceding verbal instructions or adjust its volume.
These controls affect the volume of the non verbal alert sounds (beeps).
Description
Description
NX404AU English 85
Advertisement
Table of Contents
