Table of Contents
Advertisement
3.1.1.5 Combined Search - Navigating to a Place of Interest
To find a Place of Interest in Combined Search, carry out the search as described earlier. Search for a
part of its name. When you get to the result screen, do as follows:
1.
Tap
at the top of the screen.
2.
The list is now filtered. What you see is the list of matching Places ordered by their distance
from your current location.
3.
(optional) Should your product contain Places from different data providers, you can further
narrow the list by showing Places from one provider only. Look for the provider logos at the top
of the screen. Tap one of them to see Places from that provider only.
4.
Scroll down the list if necessary and then select one of the Places from the list.
5.
Once the destination is selected, a full screen map appears with the selected point in the
middle. If necessary, tap the map somewhere else to modify the destination. The Cursor
(
) appears at the new location. Tap
6.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
The alternative way to search for a Place is to tap the
button in the Destination menu. These alternatives are different from the Combined
Note!
Search. The first one is also a name search but if there is a route planned, it will not be
carried out around your current location but along the route. The Place search in the
Destination menu is a complex Place search with several options including category search
or search around the destination of the current route.
to select a different destination.
and start your journey.
to confirm the destination, or tap
to modify route parameters, or tap
button in the Quick menu or the
NX404AU English 31
Advertisement
Table of Contents
