Table of Contents
Advertisement
3.1.1.4 Combined Search - Navigating to an intersection
To find an intersection in Combined Search, carry out the search as described earlier but use the '&'
sign to separate the two intersecting streets. You do not need to use spaces before and after the
separator character. For example you can use any of the following input texts to find the intersection
of Collins Street and Douglas Avenue (the more precise the input string the fewer false results are
expected):
•
Collins St & Douglas Ave
•
Collins & Douglas
•
Coll St & Dou Av
•
Col&Doug
•
C&D
•
Collins St& (this one will give you all the intersections of Collins Street so that you can select
the appropriate one from the result list)
When you get to the result screen, do as follows:
1.
Tap
at the top of the screen.
2.
The list is now filtered. What you see is the list of matching intersections.
3.
Scroll down the list if necessary and then select one intersection from the list.
4.
Once the destination is selected, a full screen map appears with the selected point in the
middle. If necessary, tap the map somewhere else to modify the destination. The Cursor
(
) appears at the new location. Tap
5.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
Note! The alternative way to search for an address is to tap the
menu. Unlike the Combined Search, this alternative search method is a structured one
where you can define the parts of the address separately.
30 NX404AU English
to select a different destination.
and start your journey.
to confirm the destination, or tap
to modify route parameters, or tap
button in the Destination
Advertisement
Table of Contents
