Clarion NX404AU Owner's Manual page 12

When GPS position is available, the Vehimarker is displayed in full colour, now showing your current
position.
There are screen buttons and data fields on the screen to help you navigate. During navigation, the
screen shows route information.
The button gives quick access to frequently used functions. You can change the available
functions in Settings.
By default, only one data field is displayed in the bottom right corner. Tap this field to see all route
data fields. Tap any of the data fields to suppress others and display only the selected one.
The data fields are different when you are navigating an active route and when you have no specified
destination (the orange line is not displayed).
Default data fields when cruising without a destination (tap and hold any of the fields to change its
value):
Field
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains it.
Shows the current time corrected with time zone offset. The accurate time
comes from the GPS satellites, and the time zone information comes from the
map or it can be set manually in Regional settings.
(The current time is always displayed in the top left corner of menu screens.)
Default data fields when navigating a route (tap and hold any of the fields to change its value):
Field
Shows the distance you need to travel on the route before reaching your final
destination.
12 NX404AU English
Description
Description