Opening The Access Code Menu; Adding, Changing And Deleting Access Codes - DSC neo HS2128 E User Manual

Chapter
7
Supervisor
Use when you want to allow additional users to manage Access Codes [*5] or User Func-
Codes
tions [*6]. Supervisor codes created by the master code will have the same attributes as the
master code. Supervisor codes created by another supervisor code will have the same
attributes, except the supervisor attribute. Must be assigned manually afterward. After cre-
ation, attributes can be changed for all supervisor codes. For information on how to program
a supervisor code see "Configuring additional User Options".
Duress Use if forced to access your keypad under threat. Duress codes function the same as user
Codes
access codes, except they transmit a Duress Report to your monitoring station when used to
perform any function on the system.
Duress codes cannot be used to access Access Codes [*5], User Functions [*6] or Installer
[*8] menus. For information on how to program a Duress Code see "Configuring additional
User Options".
One Time Used to grant someone one-time access to your home once per day, i.e., a cleaning person
User Code
or contractor. The ability to disarm the system is reset at midnight or when the one-time user
code is keyed in by the master code user. For information on how to program a One Time
User Code see "Configuring Additional User Options".

7.1.1 Opening the Access Code Menu

To add, change or delete Access Codes first open the Access Code Menu:
1. Press [*][5] or press [*] and use the scroll keys to navigate to Access
Codes and press [*].
2. Enter Master or Supervisor code.
3. Enter [User #] or scroll through the list of users and press [*]. On an
LED keypad the user number begins flashing.
4. To return to the Ready state press [#].

7.1.2 Adding, Changing and Deleting Access Codes

Each configured user is assigned a number as follows:
01-48 for HS2016/HS2016-4
l
01-72 for HS2032
l
01-95 for HS2064/HS2128
l
001-500 for HS2064 E
l
0001-1000 for HS2128 E
l
Access codes cannot be duplicated.
To add or change user access codes:
1. From the desired user press [*] or [1].
2. Enter a new 4, 6, or 8-digit access code. After entering a new code
you are returned to the previous menu, and on an LCD display the
flag is changed to P from -. On an ICN or LED keypad the pro-
grammed user digits are displayed. If a duplicate code is entered
an error tone sounds. After the code is programmed, the keypad
returns to the previous LCD display.
To delete a user access code:
1. From the desired user press [*] or [1].
2. Press [*]. The code is deleted, and you are returned to the previous
screen. The flag is changed to - from P. On an ICN or LED keypad
the programmed user's digits stop being displayed. After the code is
programmed, the keypad returns to the previous LCD display.
NOTE: Any proximity tags associated with deleted user codes must be re-enrolled.
- -
25
LCD Display
Press (*) for <>
Access Codes
Present Tag or
Enter Code
Press (*) for <>
{User Label}
LCD Display
Press (*) for <>
Access Code
Enter New Code
AAAA
LCD Display
Press (*) for <>
Access Code
Enter New Code
030516