Removing/Reinstalling The Adu - Konica Minolta bizhub PRO 920 Service Manual

Field Service Ver2.0 Aug.2005
6.3.22

Removing/reinstalling the ADU

Note
• When Removing/reinstalling the ADU, this work requires 2 persons since a very heavy object has
to be moved.
A. Procedure
[2]
[1]
1.
Pull out the ADU from the main body. (See "3.16.1
[3]
Cleaning the registration sensor (PS44).")
2.
Remove the fusing section. (See "3.17.1 Remov-
ing/reinstalling the fusing unit.")
3.
Remove the transfer/separation charge. (See
"3.9.1 Replacing the transfer/separation unit.")
4.
Remove the registration section. (See "3.16.3
Removing/reinstalling the registration section.")
5.
Open the reverse/exit section [1].
6.
Remove 2 screws [2] and then remove the con-
nector cover [3].
57gaf2c269na
6. OTHERS
267