Konica Minolta bizhub PRO 920 Service Manual page 89

Field Service Ver2.0 Aug.2005
[2]
[3]
[4]
[4]
5.
[1]
Note
• When reinstalling the transfer wire [2], 2 sepa-
ration wires [3], be sure to insert each wire
into the notch [5] of the vibration-proof rubber
[4].
• When
charge wire, be sure to conduct the operation
so that all of the hooks [6] of each spring are
positioned in the direction as shown in the
drawing.
[6]
[5]
[2] [3]
57gaf2c072na
Remove the springs [1], 1 each, and then remove
the transfer wire [2], 2 separation wires [3] and the
3 vibration-proof rubber [4].
reinstalling the
3. PERIODIC CHECK
transfer/separation
57