Changing Main Camera Functions With The Joystick - Canon EOS C100 Mark II Instruction Manual

Changing Main Camera Functions with the Joystick

Changing Main Camera Functions with the Joystick
You can adjust three main camera functions—shutter speed, white balance and ISO speed/gain—using only the
joystick (direct setting mode). This section will explain the basic operation of the direct setting mode. For specific
56
details about the functions please refer to the each function's section: shutter speed (A 57), white balance
(A 68), ISO speed/gain (A 60).
Operating modes:
1 Press the joystick.
• The onscreen display of the function to be adjusted will be
highlighted in orange.
• Push the joystick left/right to change the function to be
adjusted. Pushing the joystick to the right will cycle through
the options in the following order: White balance mode
icon, the ISO speed/gain value and the shutter value.
2 Push the joystick up/down to select the desired value
(ISO speed, gain, shutter) or desired white balance
mode and then press the joystick.
• The selected value will be set and the display will return to
normal.
NOTES
• The direct setting mode will end automatically if no operation
is performed for about 6 seconds or if you open the menu or
a status screen.
White balance (highlighted in orange)
Push the joystick (ÏÐ) to highlight the ISO/gain
value or the shutter value