Preparations; Preparing The Power Supply; Using A Battery Pack - Canon EOS C100 Mark II Instruction Manual

2

Preparing the Power Supply

The first time you use the camcorder, charge the battery pack. If you connect the compact power adapter to the
camcorder while a battery pack is attached, the camcorder will draw power from the power outlet.
For approximate charging times and recording/playback times with a fully charged battery pack, refer to
Charging Times and Recording and Playback Times (A 207).

Using a Battery Pack

You can power the camcorder using the supplied BP-955 or an optional BP-950G, BP-970G or BP-975 Battery
Pack. The BP-955 and BP-975 are compatible with Intelligent System, meaning that you can check the
remaining battery time.
Charging the Battery Pack
Charge battery packs using the supplied CG-940 Battery Charger. Before
charging, remove the terminal cover of the battery pack.
1 Connect the power cord to the battery charger.
2 Plug the power cord into a power outlet.
3 Attach the battery pack to the battery charger.
• Press lightly and slide the battery pack in the direction of the arrow until it clicks.
• The CHARGE indicator starts flashing and also indicates the battery
pack's approximate charge. The indicator will stay on when charging has
completed.
0-34%: Flashes once per second
35-69%: Flashes twice per second
70-99%: Flashes 3 times per second
4 When charging has completed, remove the battery pack from the battery charger.
5 Unplug the power cord from the power outlet and disconnect it from the battery charger.
IMPORTANT
• Do not connect to the battery charger any product that is not expressly recommended for use with this camcorder.
• We recommend charging the battery pack in temperatures between 10 ºC and 30 ºC. Outside the
temperature range of 0 ºC to 40 ºC, charging will not start.
NOTES
• If there is a malfunction with the battery charger or battery pack, the charge indicator will go out and charging
will stop.
• For handling precautions regarding the battery pack, refer to Battery Pack (A 196).
• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day
before, to ensure a full charge.
• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

Preparations

CHARGE indicator
23