Selecting A Group Destination - Konica Minolta bizhub C550 User Manual

Scanning
4
Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.
– For details on the scan settings, refer to "Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)" on page 2-68.
5
Load the document into the ADF or place it on the original glass.
6
Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
Note
Do not turn off the machine until the scan job is deleted from the Job List
screen.

Selecting a group destination

"Group" refers to multiple destinations that are registered collectively. Follow
the procedure described below to send data by selecting a group that has
been registered in advance.
For details on registering group destinations, refer to "Registering a group
destination" on page 3-28.
!
Detail
In order to select a group destination, "Address Book Default" (displayed
by touching [Custom Display Settings] on the User Settings screen, then
[Fax/Scan Settings]) must be set to "Address Type"
For details, refer to "Default Address Book" on page 3-43.
If the destination types are not displayed in the index, touch [Search], and
then search for destinations in the group destination type.
C550
2
2-32