Konica Minolta bizhub C550 User Manual page 186

Specifying Utility mode parameters
3
Touch [Name], and then type in the registration name, using the key-
board that appears.
– For details on typing in text, refer to "Entering text" on page 6-4.
4
Touch [OK].
5
Touch [Select Group].
6
Select a destination type, and then select the destination to be regis-
tered.
7
Touch [OK].
8
Touch [Close].
9
Touch [OK].
The Group destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job
Set.].
To change the settings for a registered destination, select it, and then
touch [Edit].
To delete a registered destination, select it, and then touch [Delete].
C550
3
3-29