Konica Minolta Network Setup Network Setup Manual page 33

5 Option Setup
To assign a particular hardware address to an IP address in the
Client List box:
1. From the
Client List
assigned the hardware address.
2. Click the
Configure
A dialog box for setting the hardware address appears.
3. Enter the hardware address into the
4. Click the
OK
The setting appears in the
To remove the setting for the IP address with a hardware address
assigned, delete any values entered into the
box, and then click the
After specifying the BOOTP settings, click the
Note
• After sending the IP addresses to a device, the
the
Client List
while the PageScope Network Setup is working.
28
box, select the IP address that will be
button.
button.
Client List
button.
OK
box. This mark means that the address was assigned
Hardware Address
box.
Hardware Address
button.
OK
icon is displayed in
box.