For NetWare (NetWare Server/ Windows Client) ......2-7 Supported environments ..............2-7 Checking the setup procedures ............2-8 Peer-to-Peer printing ..............2-8 LPR / PORT 9100 printing ..............2-9 IPP printing ...................2-10 NetWare server/client (except NDPS) ...........2-11 NetWare Server/Client (NDPS) ............2-11 Checking the accessories Accessories ..................3-2 NC-502...
Page 4
Setting up NetWare 4.x/ 5.x/ 6 remote printer mode ....7-11 Setting up NetWare 5.x/ 6 Novell distributed print service (NDPS) ........7-13 Creating an NDPS printer agent ..........7-13 Setting up the Windows computer for the NetWare client ..7-14 NC-502...
Page 5
Using PageScope Web Connection ..........8-4 About the screen layout ..............8-5 Logging in as an administrator ............8-6 Logging in to administrator mode ...........8-6 About the file download function .............8-6 Types of file that can be downloaded ..........8-6 Appendix Product specifications ..............9-2 Troubleshooting ................9-3 NC-502...
Page 7
The contents of this manual are subject to change without notice. No part of the manual may be reproduced or modified without prior per- mission. Screen images used in this manual may differ from the actual screen dis- play. NC-502...
Welcome Trademark acknowledgements PageScope is trademark of KONICA MINOLTA BUSINESS TECHNOLO- GIES, INC. Ethernet is a registered trademark of Xerox Corporation. PCL is a registered trademark of Hewlett-Packard Company. Microsoft, Windows, and Windows NT are registered trademarks of Micro- soft Corporation.
FCC rules. For Canada users Interference-causing equipment standard (ICES-003 issue 3) This class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. NC-502...
This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio commu- nications and is prohibited under CISPR 22 rules and local rules. NC-502...
First, select the most suitable network printing method for your system. (“Selecting the network print method” on page 2-3) Next, check the procedures required to perform network printing oper- ations that meet your needs. (“Checking the setup procedures” on page 2-8) NC-502...
Windows Me Peer-to-Peer printing - Using the Peer-to-Peer utility, you can connect a copier and computer to the same network. - The Peer-to-Peer utility is automatically installed when you install the printer driver. - The TCP/IP protocol is used. NC-502...
Windows NT 4.0 LPR printing - You can connect a copier and computer via the LPR print service. - The LPR print service is available with a standard installation of the oper- ating system. - The TCP/IP protocol is used. NC-502...
Printing to port 9100 - You can connect a copier and computer via the port 9100 print service. - The port 9100 print service is available with a standard installation of the operating system. - The TCP/IP protocol is used. NC-502...
Printing to port 9100 - You can connect a copier and computer via the port 9100 print service. - The Port 9100 print service is available with a standard installation of the operating system. - The TCP/IP protocol is used. NC-502...
IC-205. Add a network port to the computer. (“7 Connecting the computer and copier”) Note The configuration page cannot be printed for copiers that are not equipped with the optional Image Controller IC-205 or Fax Kit FK-505. NC-502...
IC-205. Add a network port to the computer. (“7 Connecting the computer and copier”) Note The configuration page cannot be printed for copiers that are not equipped with the optional Image Controller IC-205 or Fax Kit FK-505. NC-502...
IC-205. For details on specifying the net- work port, refer to “7 Connecting the computer and copier”. Note The configuration page cannot be printed for copiers that are not equipped with the optional Image Controller IC-205 or Fax Kit FK-505. 2-10 NC-502...
Set up the NetWare client so that it can print via the NetWare server. (“7 Connecting the computer and copier”) Note The configuration page cannot be printed for copiers that are not equipped with the optional Image Controller IC-205 or Fax Kit FK-505. NC-502 2-11...
Page 25
Check that all of the accessories listed below are included in the package. If any item is missing, contact your service representative. - This manual: User’s Guide for the Network Interface Card NC-502 - CD-ROM (Includes the network utility software)
If this LED is not lit, check the connection again, even if the copier appears to be connected correctly. If this LED is not lit when both ends are connected correctly, the network cable may be damaged. LED2 (ACT): This LED blinks when data is being transferred. NC-502...
Use the 10-key pad on the control panel to enter the IP address. (Example) To enter “192.168.0.10” Note If an element of the number is less than two digits, press the ) key to move the cursor into the area to the right of the current element. NC-502...
When AUTO is selected, we recom- mend that you set the DHCP server to assign a fixed address to the copier. NC-502...
Page 31
Press the [Yes] key to confirm the setting. The network setting menu appears again. Proceed to enter the default gateway setting. While the network setting menu is displayed, press the [3] key on the 10-key pad to select GATEWAY. NC-502...
Page 32
AutoIP function; however, transmissions via the TCP/IP protocol are not possible with network devices that have been assigned general IP addresses. For details on the AutoIP function, refer to “Product specifications” on page 9-2. NC-502...
PRINTER REPORT?. Press the [Yes] key. A list of the types of report that can be printed appears. Use the + and , keys to select CONFIGURATION PAGE?. Press the [Yes] key. The contents of the settings are printed. NC-502...
Setting up NetWare 4.x / 5.x / 6 print server mode Setting up NetWare 4.x / 5.x / 6 remote printer mode Setting up NetWare 5.x / 6 Novell Distributed Print Service (NDPS) Setting up the Windows computer for the NetWare client NC-502...
Right-click the icon for the installed printer driver. Click [Properties] to open the properties dialog box. Click the “Details” tab, and then click [Add Port]. Select Other. Select Peer2Peer from the list of port types. Click [OK]. Enter the copier IP address. Click [OK]. NC-502...
Select in the Protocol group box, enter the name of the print queue in the box (for example, “print”), and then click Queue Name [OK]. – Use characters to enter the queue name. Click [Next>]. Click [Finish]. Click [Close]. NC-502...
LPR-compatible printer. Installing the Microsoft TCP/IP Printing Service Click [Start] - [Settings] - [Control Panel] to open the “Control Panel” folder. Double-click “Network”. Click the “Services” tab, click [Add], and then install the “Microsoft TCP/IP Printing”. NC-502...
Enter the IP address for the copier into the Printer Name or IP Ad- box, and then click [Next>]. dress Select Custom, and then click [Settings]. Select as the protocol. Enter “9100” for the setting, and then click [OK]. Port Number Click [Next>]. Click [Finish]. NC-502...
Start up PageScope Web Connection. Log in to the administrator mode. Click the “Network” tab, and then select “IPP Configuration” in the menu. Check that is selected. If it is not selected, IPP printing is Enable IPP not possible. NC-502...
Enter “http://copier IP address/ipp.cgi” in the box. – (Example) If the copier IP address is 192.168.0.10, enter: http://192.168.0.10/ipp.cgi Click [Next>]. When a confirmation message appears, click [OK]. Follow the instructions that appear on the screen to complete the in- stallation. NC-502...
Select the connection settings, and check that the PServer you created is listed in the active connections section. Note Specify the users who can use the queue, printer options, number of queues, and password. Refer to the NetWare documentation for details. NC-502...
Page 45
[Print Queue Scan Rate] [*] 1 (Change as necessary.) [Mode] [*] PServer Printer Number 1 (Change as necessary.) [Connection Mode] Directory Services Bindery * If changes are made to settings marked with “*”, turn the copier off, then on again. 7-10 NC-502...
Load MONITOR.NLM using the NetWare server console. From the NetWare Server console, display the print server screen, and check that the printer name entered in step 4 is displayed for Printer 0 and that it is listed as “Waiting for job”. NC-502 7-11...
Page 47
[Print Queue Scan Rate] [*] 1 (Change as necessary.) [Mode] [*] NPrinter Printer Number 1 (Change as necessary.) [Connection Mode] Directory Services Bindery * If changes are made to settings marked with “*”, turn the copier off, then on again. 7-12 NC-502...
On the printer driver registration screen that appears, select None each operating system, and then finalize the registration. Note For information about configuring settings for printer user privileges, printer alert options, and queue allocation, refer to the NetWare docu- mentation. NC-502 7-13...
For the printer port, browse the network and specify the name of the queue (or the name of the NDPS printer) that you created. On the printer model list, select the printer driver on the CD-ROM. Follow the instructions provided by the wizard to complete the proce- dure. 7-14 NC-502...
Using PageScope Web Connection When using PageScope Web Connection In order to use PageScope Web Connection, this Network Interface Card (NC-502) must be installed on the copier. What is PageScope Web Connection? PageScope Web Connection is a device control utility program provided by the HTTP server built into the network interface card.
Page 52
Check the status of jobs that are being printed, or held in the print queue (Jobs can also be deleted if you have logged in to the Administrator mode.) - Maintenance Reset the network interface card (NIC), or image controller Initialize the image controller NC-502...
PageScope Web Connection is used in the same way as other Internet web pages. Click on links in the page to jump to that page, and use the [Back] and [Next] buttons to navigate through pages that have already been loaded. NC-502...
Enter the administrator password to log in to the administrator word mode. Tabs These are used to select the various categories of settings. Menu This is used to select various setting items or display information. Information/set- Displays the details for the item selected from the menu. tings display NC-502...
Types of file that can be downloaded Only the following types of file can be downloaded using the file download function. - PCL files - Text files (English text only) NC-502...
Page 56
If a PCL file is to be downloaded, the printer being used must support the PCL language. If a file type other than a PCL or text file is downloaded, it will not be print- ed, or will be printed with corrupt or incorrect characters. NC-502...
IP addresses that begin with 169.254 and use a sub- net mask setting of 255.255.0.0. If there are two or more devices on the same network that use the AutoIP function, these devices can communicate with each other. NC-502...
The network cable has Reconnect the cable, become disconnected or and restart or replace the there is a problem with hub. the hub. The IP address or subnet Correct the IP address mask setting is wrong. and subnet mask set- ting. NC-502...