2.
After you are finished configuring the setup, click the
Note
• To configure a NetWare print setup, the server must be bound to at least
one IPX frame.
4.3.2 Selecting the Mode
Use the procedures in this section to select the server you want to
configure as the print server, or the NDS context.
If you are using bindery service (NetWare 3.x):
1.
Put a check mark into the
box.
2.
Click the
shows a list of servers on the NetWare network.
3.
Select the server you want to configure as the print server, and then
click the
OK
4.
When everything is the way you want, click the
NetWare 3.x Bindery Server
button to display the
button.
4 Changing the Device Setup
dialog box, which
Mode Select
Next
button.
Next
check
button.
17