Specifying The Search Range - Konica Minolta Network Setup Network Setup Manual

3. Put a check mark into the box next to option you want to use under
Select Protocol
both can be selected.
Click the
Return to standard setting
protocol to the standard default.
4. Click the
OK
5. On the confirmation dialog box that appears, click the

5.2 Specifying the Search Range

When using IP protocol, perform the steps below to specify the
network device search range. Note that you cannot specify the search
range when using IPX protocol.
1. Select
Option
2. Click the
Specify Search Range
3. A check mark is in the box next to the protocol that is currently
selected on the
for details about changing the protocol setting.
. You must select at least one protocol, however
button.
on the menu to display the
Setup
Select Protocol
button to return to the
Option
tab.
tab. See 5.1 Selecting a Protocol
5 Option Setup
button.
OK
dialog box.
25