Konica Minolta Network Setup Network Setup Manual page 31

5 Option Setup
Specify IP discovery range:
Perform the steps below to specify the IP address range for the network
where the device is searched for. PageScope Network Setup searches
for devices on the broadcast address of the network specified here.
a. Type the IP address of the device you want to find into the
box.
Address
b. Type the subnet mask used by the network into the
box.
c. Click the
Append
d. The search range is set automatically in accordance with the
values you entered in the previous steps, and the resulting search
range appears in the
Add device manually:
A device that cannot be automatically searched for can be displayed in
the device list by entering its IP address.
a. Type the IP address of the device you want to display into the
box.
Address
b. Click the
Append
If the entered IP address is accessed and there is a response, that IP
address is added to the
To remove an address appearing in the
and then click the
4. If everything is the way you want, click the
5. On the confirmation dialog box that appears, click the
26
button.
Discovery Range
button.
Add Device
button.
Delete
Subnet Mask
box.
box.
box, select it,
Add Device
button.
OK
IP
IP
button.
OK