Konica Minolta Network Setup Network Setup Manual page 17

4 Changing the Device Setup
You can configure and view the following items on the
tab.
Device Model Name
This is the device model name. You cannot change the device
model name here.
Device Name
This is the device management name. You can type up to 16
characters into the text box to input a new name. However, if the
existing device management name exceeds 16 characters, you
can type up to 255 characters for a new name.
Only ASCII characters can be typed in. If asterisks (*) appear in
the device name, non-ASCII characters have been used for
naming the device.
Device Description
This is a description of the device. You can type up to 16
characters into the text box to input a new description. However,
if an existing description of the device exceeds 16 characters,
you can type up to 255 characters for a new description.
Only ASCII characters can be typed in. If asterisks (*) appear in
the device description, non-ASCII characters have been used for
describing the device.
4. After you are finished making the settings you want, click the
button. This displays the device properties with the changed
settings in blue.
5. If the settings are correct, click the
The community name input dialog box appears only if the SNMP
community name has been changed to something other than the default
name. Type in the community name and then click
12
button.
OK
.
OK
General
OK